Your HVAC system is usually a reliable component of your household that can provide years of quiet, efficient service. However, like any mechanical device, it has a finite service life. That service life can be extended by observing maintenance requirements, and your maintenance schedule should include routine inspections of your system. In order to avoid prematurely spending on new HVAC installation in Lawrenceville, GA, a wise homeowner should perform simple inspections between service calls from a professional HVAC maintenance service.
Though nothing replaces the in-depth HVAC inspections performed by professional technicians, you can keep tabs on the state of your system and execute minor maintenance tasks that will keep it running smoothly and efficiently for as long as possible. Keep reading to learn more about inspecting your own HVAC system to help it achieve its longest possible service life.
Checking your thermostat is a simple task, but it can help you isolate potential problems with your HVAC system. For example, if your AC doesn’t seem to be cooling properly, it could be due to a thermostat malfunction rather than a system problem. You can check your thermostat’s function by turning it to cool and placing the set point below the ambient temperature. The AC should turn on. Turn on the heat and place the set point above the ambient temperature. Make sure the heat comes on in response.
One of the easiest maintenance tasks you can perform is to keep the outdoor unit clean. The outdoor unit will accumulate debris from hanging trees, dead leaves, and vines. Make sure the area around your outside unit is free of vegetation and debris. If you must remove the fan cage to clean out the inside of the unit, make sure that you’ve cut off the power to the unit for safety. If the fan blades are particularly dirty or covered with algae, you can clean them with a little water and mild soap. Also, be careful around any wiring, as it can easily be pulled and disconnected. Finally, if the fins on the outer part of the outdoor unit are dirty or covered in algae growth, you can use light pressure from a water hose to clean them up, though you should avoid touching them. Avoid using a pressure washer for any of these tasks, as it could cause undue damage.
Because your air conditioner produces condensation that’s collected in a pan beneath the unit, there’s a drainpipe that helps empty the pan. However, because it’s perpetually exposed to moisture, algae and mold are likely to grow in the drain, which can cause a clog. If the drain becomes clogged, it can cause condensation water to back up and overwhelm the pan, which in turn leads to an overflowing pan that spills water in the attic. Inspect the drain visually to make sure that it’s dripping outdoors. To keep it from clogging, you can add bleach to the water in the pan. You can also gently tug on the pipe to release any blobs of algae or mold that may be clogging the drain.
One of the most important maintenance tasks homeowners can perform on their HVAC systems is checking and changing the filter regularly. Find your HVAC intake, then remove the screws on the cover and look at the filter. If the filter appears dirty or dusty, it’s time to change it. If the filter has been in place more than a month, it’s probably a good idea to change it even if it doesn’t look visibly dirty. Changing the filter at proper intervals protects the blower, prevents dust and pathogens from spreading in your ducts, and extends the life of your HVAC system.
If you want to extend the life of your HVAC system and prevent extra visits from your HVAC repair company in Lawrenceville, GA, use these tips to protect your system and keep it running smoothly. To schedule a professional inspection, contact Triad Mechanical at (770) 682-0075.
Year Founded: 1991
Lifetime Customer Satisfaction: 97%
BBB Rating: A+